The construction product market does not stand still, every day there is an increasing amount of their number, quality improves, the scope of application and assortment are expanding. Now it is fashionable to make repairs, all people are preoccupied with the appearance of their dwellings, they are striving to do everything according to the last word. And the choice is simply huge, you can find everything now, probably, only boltiks and screws are several thousand species. But perhaps the main building material is still concrete. Concrete is the basis of construction. Concrete is the most important component in construction.
The construction of a reliable house capable of standing for centuries requires a responsible approach primarily to the quality of concrete and reinforced concrete products used in it. Reinforced concrete floors made of quality materials are the key to durability, strength and reliability of erected buildings and structures. When choosing this type of material, it is necessary to take into account the maximum bearing capacity, length, thickness, method of reinforcement and, of course, their purpose. One of the perfectly proven ones in construction is PB slabs — the process of their manufacture without formwork, so to speak conveyor. This gives them smoothness and a more even surface, which in turn is a good prevention of cracks. Due to such a technological approach, there is the possibility of casting plates of various lengths, up to 20 meters. PB slabs are reinforced with a longitudinal way, with a tense wire. The thickness of the wire depends on the necessary load -bearing load and directly the thickness of the product itself. You can cut ready -made slabs only using a laser cutter, at the request of the client, they can cut into any parts even with a slanting cut.
The main construction objects where PB slabs are used are garages, panel houses, basement floors of buildings and structures. In the manufacture of a floor or ceiling from them, it is no longer necessary to carry out additional alignment. Due to the voids in the slabs, the erected building has high sound and thermal insulation. Perhaps the only significant drawback of this material is the inability to make holes in it. Plates are mounted, like everyone else through the use of a tap. During installation, must be taken into account the maximum depth of the stop depending on the type of walls, and the depth of the seal into the walls. Also, the disadvantages include the absence of loops on the plates, which gives their installation more time -consuming, but relieves the need to cut off these same loops. Choosing PB slabs for construction, you can definitely be sure that your building will be eternal!
.