Many city residents dreams of spending free time in nature. To obtain an answer to the question how to build a functional and practical summer house in a summer cottage, we turned to the specialists of the company of the artisan. After all, it was the PSK of the Artyurova who has been building any low -rise buildings throughout Ukraine for more than 10 years for more than 10 years.
Typically, an inexpensive summer house is built from bars or ready -made frame panels. Construction technology is almost no different. First you need to lay the foundation — usually a columnar monolithic or pile. Then put the walls of the house. And the last stage is decorating.
To reduce the cost of construction, we simply buy a ready -made house kit from the PSK of the Artirova. Bars and SIP panels in such sets already have spikes and grooves. You just have to fold the elements, as in a regular construction designer.
DIY DARE HOUSE
So, the main stages of the construction of a country house:
We begin construction with the foundation. If you plan a small one -story house for 2 — 3 rooms, then a column foundation is suitable. To do this, just dig holes with a depth of 1.50 — 2.0 m in the corners of the future house and along the walls, every 2 m and pour concrete. You can use ready -made concrete slabs size 200x200x400 mm. For their installation, it is enough to dig up the recesses in size 15 — 20 cm, and at the bottom to arrange a sand pillow. To create a waterproofing barrier, cover the foundation with roofing material sheets.
Based on the foundation, we form the frame of the house. We use the bars with a thickness of 150×150 mm. Then we install vertical supports from the same beam of the necessary height.
The next stage of our construction will be the flooring of the main sex. To do this, take boards with a thickness of at least 20 mm. To reduce the cost of the cost of construction, use conventional wiped coniferous boards. Before the flooring, treat it with any antiseptic.
We go to the collection of walls. The row behind the row we lay the horizontal bars, compacting Pacley, and fasten them with dangers. We leave holes for future doors and windows.
The walls are ready, the roof is. Through even gaps we put the horizontal jumpers on which we install the rafters. We use boards of 150×45 mm, and boards 100x40mm are suitable for braces and racks. We cover our house, depending on financial capabilities — slate or metal tiles.
The frame of the structure is ready, set the windows and doors.
We go to internal arrangement. We beat the ceiling. Using drywall stoves or plywood sheets, we divide the interior of the house into different zones: kitchen, living area, if necessary — bedroom.
Do not forget to take care of creating a warm floor. To do this, bed a layer of mineral wool or parcham on the main floor, they will perform a waterproofing role. Put a layer of boards or thick plywood on them.
The last point external decoration and protection of the walls of the house from weather phenomena. There are a lot of options, but the cheapest way is to apply paint to the walls.
DIY DARE HOUSE
5 (100%) 1