Since ancient times, the mirror has been widely used to lighten and expand the space. However, it is important to correct it correctly. After all, an unsuccessfully made combination will not only not create the desired effect, but also ruin the entire interior. Below we will talk more about how mirror tiles are properly fitting.
What are the characteristics of mirror tiles?
Video — mirror tile
The first thing that stands out in this tile is, of course, its magnificent design. Therefore, it is often used to design various interiors. Allows you to lighten the room, make it wider. Therefore, if you have a small and poorly lit room, then the mirror tile will be the best finishing material for it. In particular, tiles with special processing are popular — fatcet. This is a method that involves eliminating the chamfer from the edge.
He gives the mirror a special and unique look. On average, the width of such processing is from 4 to 42 mm. Removing devices are used to remove the chamfer. If we talk about the operational properties of tiles, then they are also available. It is distinguished in it resistance to humidity, chemicals, frost resistance. Plus, high -quality tiles are always made according to GOST, because its strength characteristics are also high. It is successfully used both in public premises and houses.
However, it is worth knowing that this material has a significant drawback — the complexity of installation. To lay it, a certain skill is necessary. If you have not done this before, then trust the specialists. Plus, if you prepare the walls poorly (small irregularities will remain), then all this will be reflected on the mirror coating. Therefore, when styling, it is important to comply with all conditions and requirements, as well as clearly follow the instructions.
We get acquainted with the basic rules of finishing using mirror tiles
On the video — mirror tile
As already mentioned, mirror tiles should fit strictly according to certain rules. It is holding them, you will achieve the maximum effect. We describe in the most detailed several basic rules.
To increase and expand the space, it is recommended to make mirrors opposite windows. Thus, the windows will be reflected in the mirror and this visually lengthen the room. However, it is worth knowing that this rule is valid only for light rooms.
Mirrors can be inserted into the wall with a single canvas or fragmented by the frames (peculiar squares of mirrors are obtained). Such crushing with the help of frames visually reduces the room. A large mirror canvas, on the contrary, increases the space.
It is best to place the tile in such a way that it does not create a “behind -grinder”, and there is no tension. In theory, it is recommended to mount it somewhere behind (above the bed, behind the sofa). Since if you see your display all the time, it creates some kind of discomfort.
If you need to give the volume and visually expand the room, you can finish only the upper part of the room with mirrored tiles. At the same time, the seams are not processed with frames (there will be the effect of a single mirror).
When decorating a bathroom, mirror tiles to ensure that it is the maximum amount of light. Better use scattered light. At the same time, glass and mirror shelves should be excluded.
Mirror tiles — we lay the material correctly
Laying mirror tiles differs from laying ceramic or glass. Before proceeding directly to work, it is necessary to prepare the material itself — cut it into the desired size of the panel. Therefore, the task may arise — how to cut tiles? You can use a grinder, tile cutter or diamond glass cutter for this. The best tool is diamond glass cutter, because when working with a grinder and a tile cutter there is a high probability of breaking the edges. Accordingly, after that, this tile will be no longer possible. She just will just look ugly.
Glue for styling can use a typical tile. For example, Bautechnil is good. In some cases, sealant is used. Next, they begin to apply glue to the surface of the walls with a total layer of about 6-10 mm. The remains of the composition are removed by a gear spatula. Then the direct application of mirror panels begins. To comply with the evenness of the rows, crosses are used. As a rule, their size is from 0.1 to 10 mm. Choose in line with what width of the seams you need. Remember that the wider the seams, the more the effect of the fragmentation of the space is created.
After the tiles were applied, it is worth gently tapping them with a rubber hammer. The mirror does not shrink, because it is important to do work with care. At the last stage, after a few days (3-4 days), a grind of seams is made. Such a time is needed so that the tile is completely dry. If the repair was carried out in the bathroom, then it is worth using special moisture -resistant compounds or sealant (often silicone). They do not miss moisture and provide aesthetically attractive appearance for the entire surface. The remains of the grout are washed off with warm water.
Note! When applying sealant, use a special gun, the use of which will accelerate and simplify work.