Content
Set the door or window. The next step is to ennoble the openings in which they are installed.
And so, you decided to buy the front metal door in Moscow, and the first thing that will worry you is to dismantle the old door and install a new one.
Introduction
With any, even the most painstaking dismantling and installation, the window or doorway will be damaged. Perhaps this will not be global destruction, but in any case, fasteners and traces of the propentation will remain visible.
To hide all this resort to sloping technologies. In addition to aesthetic perception, they also assign the functions of protection against drafts and sounds. After all, no matter what modern and advanced doors and windows are installed, they protect only the space that they close, and the remaining volume of the direct opening must be pulled up to their level.
By and large, the arrangement of door and window openings is carried out using the same techniques. Technologies for the arrangement of slopes with the task of the doorway assigned to the slope is to hide the mounting elements of the door box and give a worthy appearance.
Sloping technologies
Several sloping technologies are used:
Plastering and applying the finish.
The device of the entire slope using solutions is considered one of the most optimal methods in terms of insulation from drafts and sound. Having resorted to this method, you can get an even hollow slope, which will eliminate the possibility of dust and moisture, as well as deformation when exposed to it.
It is not advisable to bind plastic rings to plastic windows. Previously, a layer of silicone sealant is applied between the frame and the slope. This requirement is associated with various indicators of the expansion of materials. With non -compliance, cracking of the slope may occur.
Gluing facing materials.
The technology consists in applying materials directly to an unprepared black slope. The disadvantage is the complication of installation in the presence of significant changes in the plane of the wall.
A similar method is considered the most economically beneficial due to the low cost of materials and the ability to carry out work on its own, without the involvement of a specialist.
The frame of the frame followed by applying finishing materials.
The technology allows you to achieve excellent results. In the vast majority of cases, the frame is constructed from metal profiles and it is sheathed with drywall sheets with subsequent finish processing.
Bruttered
Along with a metallic, a device and a frame of wooden bars are possible. It is applied as an alternative to the first method, in situations when it is impractical to spend a large amount of solution for leveling the doorway to level the doorway. A distinctive feature is the possibility of hiding communications inside the slope, for example, input of cables, laying and connecting lighting of lighting.
Installation of cladding using a profile.
The method consists in the use of the starting profile, which is pre -attached directly to the frame around the entire perimeter. The panel is mounted in it and with the help of wooden bars is aligned relative to the opening. The space remaining between the panel and the wall closes the PVC corner. A very similar scheme when the grilles are placed on the windows steel.
Conclusions
Additional insulation is also possible using the heat -insulating material laid between the wall and the panel. Do not forget that protective coatings from the doors and windows are removed after all the work on the construction of the slopes. The possibilities of designing openings are endless and able to fit into any interior, favorably emphasizing it.
Ennoble the openings after the installation of doors and windows.
5 (100%) 1