Basic requirements for the installation of a floor gas boiler

To date, many specialized companies offer to buy a gas boiler in Nizhny Novgorod, which can provide a sufficiently large country house with a warmth. If heating of just such a building is required, then it is recommended to buy a powerful and effective floor gas boiler in Nizhny Novgorod.

Even before buying a gas boiler in Nizhny Novgorod, you need to find a place and properly prepare the premises for the installation of equipment. Some country householders do not know that there are special rules for installing floor gas boilers in private houses, so buying equipment in Nizhny Novgorod is only half the age.

Regulated installation standards

Among the basic requirements for the installation of floor gas boilers in Nizhny Novgorod, the following can be distinguished:

If the house is still built, then you need to plan a room for the installation of a gas boiler in advance. This room should have a natural air flow;

The presence of a supply and exhaust ventilation system;

The presence of a hole for a chimney (suitable pipes can be bought at any construction store of Nizhny Novgorod);

The chimney should be 100% sealed so that the carbon monoxide does not get into the boiler room;

The installation of floor heating equipment should be spacious, which will allow the maintenance, repair and operation of the boiler;

When decorating the boiler room, it is necessary to use non -combustible finishing materials;

The premises should be connected to the water supply and sewer systems;

The minimum area of ​​the boiler room is about 4 square meters. m., The minimum ceiling height is 2.5 m;

The power supply for the boiler room should be supplied through a separate electric shield equipped with all the necessary protective equipment;

The gas line can and should be made in the combustion even before buying a boiler in Nizhny Novgorod, so that it is easier to choose and install equipment in the future;

If the installation of several units operating on gas is provided, then each of them needs to install your own valve.

Who should do the installation?

Installation is a complex event that requires a professional approach, which is described in detail on the site in the corresponding section. With independent installation work, it is likely that the equipment will quickly fail. In order not to buy a new unit, it is best to entrust the installation work to professionals.

.