In the modern world, several varieties of garage and industrial gates are known, which we will consider.
Rolled gates are a kind of enlarged copy of the roller. They consist of the main canvas, guides, boxes, where the shaft and control devices are located. The opening of such a gate occurs as follows: a canvas consisting of connected lamellas moves along the guides, wrapping himself on a shaft in a box. When the gate is closed, the opposite. The canvas in such a gate is made from the profile of an aluminum roller rolling containing polyurethane foam filler. One lamell has a height of 77 millimeters, while its thickness is about16 millimeters.
Sectional gates are used in both the industrial and household sphere. They are simple in management, silent when opening, compact and very strong (20-120 openings per day). Among other things, they are difficult to hack, they have good warmth — and sound insulation. The canvas consists of several sandwich panels (the thickness of each is 20-80 mm). It is worth noting a fairly simple manual opening-covering of this type of gate.
Dear friends, if you are interested in the unification of the loggia with the room, then follow the link. There you can find a lot of useful information.
The swing gates are often applicable as entry or as a gate for rooms where the installation of sectional or other gates is impossible. These gates are distinguished by the possibility of their individualization using various design solutions.
Equipping (sliding) gates until recently were used only at large enterprises. Now this type of gate is often used in private possessions, using as entry. The advantage of this variety of the gate is their compactness.
Folding gates are used in industrial rooms to overlapping large openings. The height of the jumper is from 170 to300 mm. When opening, these gates are added up. They consist of vertically-controlled panels that are connected by loops.