To lay a line of wiring in all rooms in the apartment, the home craftsman needs to do the following stages:
calculate on paper an electric circuit of the future electricity supply system;
determine the location of its main nodes;
decide on the budget;
lay strokes for hidden wiring, if the builders did not leave the recesses between the ceilings to lay the wiring;
lay cables, wires, veins in strokes;
put accessories (auxiliary devices, switches, outlets, a switching hinge shield Shhit-Raspredelnyij);
deal with the introductory shield;
control the safety of new wiring;
Check the stability of the mounted wiring.
1. Drawing future wiring
In this drawing, the home master fixes how many spotlights, sockets, switches and installation boxes are primarily necessary for wiring. After these calculations, it is necessary to calculate all costs for materials and tools.
2. Pange on the walls
The old wiring is de -energized, dismantled, and you can start work. After that, markings are made on the walls. Places are placed in which sockets, switches, mounting boxes will be located.
3. Laying the track
The track is laid parallel to the ceiling or floor. Where there are switches or sockets, the wire must turn sharply 90 degrees to reach the outlet or switch at right angles. It is necessary to take into account the automatic introduction of a reserve for uninterrupted power.
If the developers did not leave grooves for wiring, you need to last the walls along the route of the track. Shtrobes should be laid strictly in a straight line, it is unacceptable for them to be winding. To help the master of the Bulgarian, chisel, hammer and punch. According to the scheme, the wires are broken. Masters and installation boxes are installed. As a rule, the wires start from the outlet (switch), and end in the mounting box. Rosettes and switches are mounted. In the distribution shield, the wires are correctly and regularly connected. Now you need to check how the wiring works.
5. Settling a stroob
The strokes are covered with alabastr, plastered, skinnet, and then you can glue wallpaper or panels on top.
6. Safety precautions
The old wiring behaves very insidiously. The wire in it, perhaps, is de -energized, but by accidental coincidence it can be reanimated at the very moment when an amateur master works with current. It is preferable, no doubt not take risks! Invite specialists! Installation of wiring is such a complex process that only people with practical experience can conduct wiring correctly.
.