Before proceeding with the installation of suspended ceilings, you need to know all the size of the premises. The area of one ceiling canvas is limited only by sagging. For rooms of large sizes, supports are used, and the ceilings themselves are typed using several paintings. To mount pipelines and lamps, in the canvases you need to make cuts. The canvases are mounted on metal or plastic profiles, which are fixed along the perimeter of the walls.
Today there are many fasteners for stretch ceilings. These are harpoon, and wedge, and cam and lace.
Stretch ceilings are mounted only after the full finish is completed in the room. All walls must be perfectly even.
On the wall perimeter using mounting dowels, you need to fix the profiles that should withstand human weight. Only after the room is warmed up to 40 degrees, the panels must be laid in the center and the mounting is pre -mounted using the clamps.
The panels should be warmed from 60 to 70 degrees, because poorly warmed canvases are very difficult to pull, and excessively heated ones will not be fixed and will lose their appearance. The panels are attached first in the corners, followed by their advancement to the right and to the left.
The construction of buildings and the repair of apartments is a long process, and without protective equipment it becomes unsafe. Labor protection tools for each employee should be the most modern. Builders must be provided with mask, special headphones, gloves, respirator.