The bathroom is one of the most wet rooms in the house, therefore it is very important to organize a microclimate that does not allow the development of microorganisms that harm a person. Since the bathroom is often located outside the zone of action of the bulk of the air flows in the room, it is almost impossible to effectively cope with its functions to conventional ventilation. The best way to eliminate excess moisture is the acquisition of this type of fan.
The principles and advantages of the exhaust fan
The devices of interest to us are a local radius of action, removing wet air directly from the room. The advantages of such devices include the availability, ease of installation, a wide range of shapes, colors, additional functions and, of course, efficiency in removing excessive moisture.
Exhaust fans are divided into types:
Assed -type fan. Is the most popular in the number of attitudes. Product material often plastic. Consists of a lattice and an engine with a propeller. It is installed in almost any opening with air resistance.
Centrifugal type fan. It is installed with a long ventilation channel, as it works with the help of a turbine and thanks to this it provides an air output over long distances. In the work of the noisophone.
Radial fan. It is set if it is necessary to work with strong air pressure.
Diagonal. Air removal is carried out diagonally.
Diametrical. Ideal for the output of heavy and dirty air because it has the best efficiency.
Channel fan. Are a cheap and effective device, but a special channel is needed for installation.
Extra -type fan selection
When choosing, it is necessary to take into account some important nuances: whether the wall will withstand the weight of the structure, given that the device is attached with screws, screws or with the help of brackets. When installing the device on the window, it is worth using elongated screws and latches, as well as short air ducts.
When purchasing an exhaust fan, it is better to opt for models, which are suitable for suitable fasteners. With incorrectly selected fasteners, the duration of the effective operation of the device can significantly decrease.
If the use of the device is not often carried out, it is worth choosing a manual type of operation of the operating mode of the mode. However, if the room needs ventilation constantly, the device with automatic equipment will be preferable.
The cost of such fans directly depends on the power of the device, its efficiency, speed, pressure and air flow rate. Also, when choosing, you should take into account the size of the room. For significant savings in the process of future use, it is worth taking models that have power adjustment up to the device to turn off the device. It is quite convenient to have a timer for programming the operating mode of the device.
It is important to remember that the device should be protected as much as possible from the water from the water, as well as when installation in an apartment building, the fan should contain a reverse mechanism that prevents the passage of air flows into the ventilated room.
Vents exhaust fans
These fans are very popular.
The main features of Vents high fans:
used for rooms with a small area;
Suitable for standard air ducts;
There are models for installation both on the wall and on the ceilings;
The case is made of high -quality high -strength plastic;
almost silent in work;
It is possible to install additional functions;
There are models with the reverse mechanism;
cord switch;
The device is safe because it works on an engine with a high voltage.
Fan installation
To supply voltage to the device, it is necessary to carry out a wire responsible for the light. If the device with a manual type of power is installed — it is worth installing a switch with two buttons: one for light, and the second to turn on and off the device.
The easiest way to install in an existing ventilation opening. To do this, you only need to mount a suitable pipe of plastic there and fix the solution for finishing work, having previously not forgotten the wires to power the device.
Before you include the device in the network, be sure to read the instructions.
For installation, lubricate the back panel with glue and tightly press to the wall or other selected installation site. Installation of the grill is performed using specially provided latches or screws.
Do not forget that for the effective and long operation of the device, it is necessary to carry out periodic cleansing of the grate from collected debris and dirt. Soap solution and vacuum cleaner are well suited for this.