Today, a chemical for cleaning chimneys is an excellent replacement for the mechanical method. It consists of their microscopic particles that make up the reaction with the resin, and prevents the formation of soot. In this article, we will describe the most popular chemical compositions and other means and methods for effective purification of the pipeline.
What will happen if you do not clean the chimney?
The form demonstrates a tool for cleaning chimneys
Many can ask the question — “Well, I will not clean the chimney this year, and what is the same?»And is it necessary to eliminate soot, dirt and other pollution every year. As it turned out, soot adversely affects not only chimney channels, but also human health. However, before talking about it, let’s figure out how it is formed? So, soot is a product of low -quality combustion of the fuel available in the firebox. That is, firewood chopped by an ax. Its amount directly depends on the quality of the fuel. Therefore, the soil layer can be reduced at times. It is enough to ensure proper burning.
Now let’s figure out what will happen if you do not monitor the smoke channels and do not clean them. Firstly, this reduces the effectiveness of the heating system. The chimney channels begin to narrow, and the thrust becomes less. The walls of the pipe while wear out faster. All this in general can lead not only to clogging, but also to complete blockage of the chimney. Secondly, there is a high probability of fire, as there may be fire in the pipe. Thirdly, the saza adversely affects the lungs. All these points are already enough to monitor the state of the chimney.
Chemical for cleaning the chimney
The tool for cleaning chimneys is presented in the video
As you know, the chimney can be cleaned in several ways: chemical, mechanical and folk methods. In the mechanical method, special equipment, brushes are usually used. The bottom line is that the tool for cleaning the chimney is taken with them to the roof and begin to eliminate the soot in the pipe, soot and dirt. Usually a special brush is used for this. In some cases, a stick is used, on which the load and ruff for cleaning the chimney are attached. There are some devices with various nozzles. But, as a rule, such equipment for cleaning chimney is ineffective.
Another method is chemical. Such a chimney cleaner has the appearance of a liquid or dry composition, which is placed in the furnace. He can act as follows. Some components contain special components that interact with the resin and turn it into combustible gas that comes out. Other mixtures at high temperature form gases that destroy the deposits of the resin. As a result, the soot crumbles into the furnace. Just clean the furnace with a brush. Of the most recommended compositions, the following can be distinguished:
«Stumpfyre» — developed and created in the USA. Its effectiveness is estimated at 84%. It contains 4 components, including lead acetate, which in turn is a particularly toxic element. Therefore, this mixture has lost its popularity over time.
«Funny chimney sweep» is the safest because it does not contain chlorine. At the beginning and end of the furnace season, it is important to burn one log for cleaning the chimney «chimney sweep». At the same time it is important to burn it separately. Smoke that is formed during burning, interacts with soot. She becomes fragile. And after a couple of days it spilled out into the furnace. You just need to eliminate it from there.
«Cominic» — developed and produced in the Czech Republic. The active component is copper chloride. The composition is very effective. However, it is worth remembering that mixtures containing chlorine are harmful to the nature and health of human.
It is also important to know that the first and third compositions (“Stumpfyre”, “Cominic”) form in the course of burning gases that have an unpleasant odor. Therefore, you will often have to ventilate the room.
Folk remedy for purification of chimneys
There are several folk cleaning methods. One of the most popular are potato residues (peel). In the process of combustion, a great thrust is created, thanks to which the soot itself comes out. Also, a good effect is due to the use of boiled water. 3 liters are poured into the chimney from above. However, it is important to ensure that rust does not form. That is why after «washing» the stove is properly drowned. This method is very effective. As a result of cleaning, you will see how even the oldest deposits come out.
In addition to the proposed methods, preventive measures can be carried out.
Copper sulfate or stone salt prevent the formation of soot — a mixture of stone salt should have the following ratio: 5 parts of salt, 7 parts of the nitrate, 2 parts of the coke of powder.